Rev-A-Shelf 53PSP3-18SC-MP Three-Tier Solid Bottom Blind Corner Optimizer Manuel utilisateur
PDF
Scarica
Documento
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 5PSP SOFT-CLOSE CHROME BLIND CORNER ORGANIZER TOOLS REQUIRED: 1 8 1 4 Item No. 5PSP-15 PANELS CHECK LIST 3 1 3 #2 8 C Foot7 1 1 1 1 31 84 33 88 2 2 M4x10mm flat-headed screw 2 3 M6x10mm wafer head screw 8 1 MAINTENANCE: 2 CARE AND 4 M5x6mm flat-headed screw 8 3 8 Clean with a damp cloth and 5 5/32 x18mm wood screw 19 11 22 wipe parts dry. 3 32 3-TIER 3 5 5flat-headed screw 2 2 M4x10mm ASSEMBLY TIME: #1 ESTIMATED16 8LIST FITTINGS CHECK 38 3 M6x10mm #2 wafer head screw #1 55 Description 55 flat-headed QTY 4 BM5x6mm screw 8 #1 #1 16Handle 5 5/3288x18mm wood 2 screw 19 116 45 MIN 5PSP-XXSC-CR 4 C D 5 5 8 C16 4 E F D D For 15” unit 1” (Left) For 18” unit 8 FITTING PARTS LIST: QTY Handle 2 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 M5x6mm flat-headed screw 8 5/32 x18mm wood screw 19 Shoulder Bolt 2 Wheel 2 90˚ 5PSPSC-15 (15” Opening) page 4 right handed 1” 1” door 5PSPSC-18 (18” Opening) page 6 left handed door 5PSPSC-18 (18” Opening) page 8 right handed door 2. 12” (305mm) 1 2” 2 90˚ 90˚ 1” 3 4 5 6 7 8 PANEL PARTS LIST: Description 1. 10” (256mm) 2” 2” (Left) 1 (Left) 5 1 2 7-1/4 ” (184mm) 2” B 20141120-B01 7 5PSPSC-15 (15” Opening) page 2 left handed door for full height application (Not availble in Orion Gray) B 7 64 A A 5 6 INSTALLATION OPTIONS B for a door drawer application 2-TIER 16 1 Base D Guide A 32 1#264 channel #2 16 1 B33 Frame E Basket 77 32 32 Foot 64 64 CHECK 1 LIST C 2 FITTINGS Description QTY D Guide channel 1 2 Handle 4 E Basket 1 C 5PSP3-XXSC-CR 2 Hooks (Orion Gray Version Only) 1 12” (305mm) Description QTY Base 1 B Frame 1 C Foot 1 D Guide channel 1 E 12”Basket (305mm) A90˚ B F 2 10” (256mm) Base LIST PANELS ACHECK B Frame Description QTY 11 QTY 1 88 #2 7-1/4 ” (184mm) 11 Description 44 #2 #2 1 8 10” (256mm) 1 4 7-1/4 ” (184mm) Item No. 5PSP-15 4 or 6 3.Solid Bottom Tray 8 WATCH VIDEO TUTORIALS OF PRODUCT INSTALLATIONS WWW.REV-A-SHELF.COM/VIDEOS 5 D I-5PSPSC-1219 Full Height Blind Right A Blind Portion Blind Portion of Cabinet of Cabinet 8 19 5 Door Opening Full Height Blind Left Shown with adjacent cabinet 2 3 B Full Height Blind Right Door Opening (Left) Full Height Blind Left Shown with adjacent cabinet E Blind Portion of Cabinet 5PSP-15 (LEFT HANDED DOOR/15” OPENING) Door Opening Door Opening Door Opening Door Opening Door Opening D Mount Base (Fig A) 2. Note: If installing into a face frame cabinet, Slide Base A must be flush with the face (Left) frame opening. 2 7-1/4 ” (184mm) No. 5PSP-15 QTY 1 Faceframe 12” (305mm) 1 12” (305mm) 1 Base CK LIST 1 Frame n QTY 1 Foot 1 2 1 Guide channel STEP 2 1 1 Basket Attach the base 4 (A) with slide 1 2 channel (d) to floor3of cabinet TINGS CHECK A el 1 (Fig B)LIST Description QTY 4 2 Handle NOTE: Pre-starting the CK LIST mounting 3 screws (4) 4 is M4x10mm flat-headed screw 2 n QTYrecommended M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 screw 19 4 C Fig B) 3. E D 5 D D 3. 4 1. (Left) m No. 5PSP-15 A 5 1. D Optional Rear Handle Position B Fig C) 1 1 Base Attach Handles. 1 Frame K LIST 2-TIER (FIG C) Foot 2 QTY 1 41 Guide channel 1 1 3-TIER (FIG D) Basket 4 1 FITTINGS LIST 3 1 CHECK 2 A Description 7 6 QTY l 1 2 4 1 Handle 4 2 M4x10mm flat-headed screw 2 2K LIST 3 3 M6x10mm QTYwafer head screw 8 C B A 5. STEP 3 2 4. To front of cabinet B From Door Opening (Left) PANELS CHECK LIST QTY 15 Description 3 B 1 A E 6 7 4 B 12” (305mm) 2 B 12” (305mm) Forward Handle Position 800-626-1126 | rev-a-shelf.com 5. 10” (256mm) ANELS CHECK LIST -15 Description BLIND 1. 10” (256mm) 5 1. (Left) Fig A) STEP 1 Fig D) 2 7-1/4 ” (184mm) 4 7-1/4 ” (184mm) K LIST QTY 2 crew 2 crew 8 crew 8 crew 19 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening 10” (256mm) 5 Door Opening 7-1/4 ” (184mm) l 1 1 1 1 4 1 10” (256mm) 4 QTY 6 7 C 2 C 22 A 1 1 3-Tier Handle Position D 1/2 E 12” (305mm) Item No. 5PSP-18 PANELS CHECK LIST Description QTY 2 C A 2. B 3 Adjust front wheel position for 2 1 Handle left 2hand opening. M4x10mm flat-headed screw(Fig 2 E) 4 2 3 M6x10mm wafer head screw 8 4 M5x6mm screw A 8 Attach feetflat-headed (C) using 5 5/32 x18mm wood screw 19 screw (3) (Fig F) D 3 E 5 D 3 Fig F) 1. (Left) 3 D 4 3 3 5 4. 1 (Left) 2 STEP 5 A C BLIND 1. 4. 3. D 5 4 2 5. 4 1 4 1. A Fig H1) Fig H2) Attach Hooks (Orion Gray): 5. 3. E 4 4 2 1 12” (305mm) 5 D 4 1/2 4 E D 12” (305mm) (Left) NOTE: Baskets show in forward position. They can be moved to the rearward position for additional clearance. Bottom basket must hang from the 2nd wire from the top. 5. Fig G) 4. Attach hooks (Orion Gray version only) (Fig H1) and hang the baskets as shown. (Fig H2) 5. 1 BDOOR Secure the feet (C) STEP 6 B 2 14” (357mm) K LIST 2. base (A) using screw (4) to3the QTY (Fig G) 2 4 crew 2 crew 8 4. rew 8 5 rew 19 3 4. 3. E 3. 10” (256mm) l 1 1 1 1 4 STEP 4 FITTINGS CHECK LIST Description QTY 2. B 7-1/4 ” (184mm) K LIST QTY 2 crew 2 5 8 crew rew 8 K rewLIST 19 QTY Guide channel Basket 1 1 1 1 4 10” (256mm) l 1 1 1 1 4 Base Frame Foot 3. C Fig E) 7-1/4 ” (184mm) K LIST QTY A B C D 1E 2. 1 7-1/4” (184mm) 10” (256mm) 5 20141120-B02 2. 3 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening Door Opening Full Height Blind Left Blind Portion Blind Portion of Cabinet of Cabinet Foot 1 Guide channelDoor Opening 1 Basket 4 (Right) C 1 2 B 5PSP-15 (RIGHT HANDED DOOR/15” OPENING) A Door Opening E Door Opening FITTINGS CHECK LIST 3 STEP 1 Description QTY 1 2 3 4 5 5 Full Height Blind Left Shown with adjacent cabinet (Right) Fig A) 2 Handle Mount Base (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Note: If installing into a face M5x6mm flat-headed screw 8 5 frame cabinet, Slide Base A 5/32 x18mm wood screw 19 1. D 2. BLIND must be flush with the face frame opening. 7-1/4” (184mm) 10” (256mm) C D E 8 19 7-1/4” (184mm) 10” (256mm) 4 screwItem No. 2 5PSP-15 screw PANELS 8 CHECK LIST QTY screw 8Description 5 1 A Base 1 Frame screw B 19 Faceframe 7-1/4” (184mm) 10” (256mm) (Right) 1. 3 B 2 4. 2 To front of cabinet 12” (305mm)1 12” (305mm) From Door Opening No. 5PSP-15 4 C 1 1 Base CK LIST 2. 1 Frame n QTY 1 Foot 1 2 1 STEP 2 Guide channel 1 1 Basket Attach the base 4 (A) with slide 1 channel 2 (d) to floor of cabinet. TINGS CHECK 3 A el 1 (Fig B)LIST Description QTY 4 NOTE: Pre-starting the 2 Handle CK LIST mounting screws (4) is 3 4 M4x10mm flat-headed screw 2 recommended n QTY M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 screw 19 B B Fig B) A 5 3. D D A Optional Rear Handle 5. Position Fig C) (Left) 1. Fig D) STEP 3 1 1 Base Attach Handles. 1 Frame K LIST 2-TIER (FIG C) Foot 1 2 QTY 1 Guide channel 1 1 3-TIER (FIG D) Basket 4 1 4 FITTINGS 1 CHECK 2 73 6 LIST Description QTY A l 1 2 4 4 Handle 2 1. (Left) 4 1 E 6 7 B 2 A 6 7 10” (256mm) PANELS CHECK LIST QTY 5 Description 4 B 3 m No. 5PSP-15 E D 3 4. M4x10mm flat-headed screw K LIST 3 C 3. B Forward Handle 12” (305mm) Position 800-626-1126 | rev-a-shelf.com 12” (305mm) 5. C C 10” (256mm) QTY 7-1/4 ” (184mm) Description A 22 7-1/4 ” (184mm) ANELS CHECK LIST -15 2 2 1 3-Tier Handle Position D 2/21 E 20B-02114102 2. .2 C Fig E) 5 STEP 4 3 .1 D Fig F) D 3 3 2 4. BLIND 1 4. STEP 5 C 1. 5. A E. 3 10” (256mm) 2 )mm753( ”41 B Fig G) 5. 1 DOOR (Left) E ”4/1-7 )mm652( ”01 )mm481( l 3 B 4 1 1 1 1 4 .2 3. D 5 K LIST QTY B B Adjust front wheel position for right hand opening. (Fig E) 2 Attach feet (C) using A screw (3) (Fig F) K LIST 5 3 QTY 2 4 crew 2 crew 8 rew 8 5 rew 19 C E 2. Secure the feet (C) 7-1/4 ” (184mm) to3the base (A) using screw (4) K LIST QTY (Fig G) 2 .5 4 crew 2 crew 8 rew 8 5 rew 19 2 5 D D 12” (305mm) .4 4 Fig H1) (Left) 1 4 1. Fig H2) Attach Hooks (Orion Gray): .5 STEP 6 Attach hooks (Orion Gray version only) (Fig H1) and hang the baskets as shown. (Fig H2) NOTE: Baskets show in forward position. They can be moved to the rearward position for additional clearance. Bottom basket must hang from the 2nd wire from the top. 4 .4 A 4 3. 10” (256mm) 1 1 1 1 4 1 .3 4 7-1/4 ” (184mm) K LIST QTY l 3. 5 12” (305mm) D E 2 1 2/1 4 5 1 Door Opening Door Opening A Full Height Blind Right 4 Full Height Blind Right Full Height Blind Left Shown with adjacent cabinet 5 Blind Portion Blind Portion of Cabinet of Cabinet 5 Full Height Blind Left (Left) Shown with adjacent cabinet Blind Portion of Cabinet Door Opening STEP 1 Mount Base (Fig A) Door Opening Door Opening 1. Fig A) (Left) 1. (Left) Note: If installing into a face frame cabinet, Slide Base A must be flush with the face frame opening. 2. 7-1/4” (184mm) 10” (256mm) BLIND 2 Faceframe 2 4. 1 To front of cabinet 14” (357mm) No. 5PSP-15 B 3 1 14” (357mm) From Door Opening QTY C 1 1 Base CK LIST 1 nFrameQTY 1 Foot 1 2 1 STEP 2 Guide channel 1 1 Basket Attach the base 4 (A) with slide 1 channel 2 (d) to floor of cabinet. TINGS CHECK 3 A el 1 (Fig B)LIST Description QTY 4 NOTE: Pre-starting the 2 Handle screws (4) is CK LIST mounting 3 4 M4x10mm flat-headed screw 2 recommended n QTY M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 screw 19 m No. 5PSP-15 PANELS CHECK LIST QTY3 1 5 Description STEP Base Attach Handles.1 1 Frame K LIST 2-TIER (FIG C) Foot 1 2 QTY 1 Guide 1 1 channel 3-TIER 4 (FIG D) Basket 4 1 FITTINGS LIST 3 1 CHECK 2 Description QTY 7A 6 l 1 2 4 Handle 4 M4x10mm flat-headed screw 6 2 K LIST 3 M6x10mm QTYwafer head screw 8 B Fig B) 3. 4 C B A 5 D E 3. D D 4 5 DA 1. (Left) 5. Optional Rear Handle Position B Fig C) (Left) 1. Fig D) 4 1 A 6 7 E 2 B 10” (256mm) ANELS CHECK LIST -15 Description 4 5PSP-18 (LEFT HANDED DOOR/18” OPENING) D Door Opening Door Opening 5 E Door Opening D M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 M5x6mm flat-headed screw 8 5/32 x18mm wood screw 19 10” (256mm) 3 Door Opening 2 3 4 5 B 12” (305mm) Forward Handle 5.12” (305mm)Position C 6 7 7-1/4 ” (184mm) 19 4 7-1/4” (184mm) 10” (256mm) QTY 192 2 8 8 2 7-1/4 ” (184mm) 21 1 21 84 IST 8 2 C A 22 2 1 3-Tier Handle 1 Position D 800-626-1126 | rev-a-shelf.com 1/2 E 12” (305mm) PANELS CHECK LIST Description QTY K LIST QTY 1 1 1 1 4 K LIST QTY 2 crew 2 crew 8 rew 8 rew 19 A B C D 1E Base Frame Foot Guide channel Basket STEP 4 1 1 1 1 4 FITTINGS CHECK LIST Description QTY 2. 1 2. 2 B A 2. 3. B 3 Adjust front wheel position for 2 1 Handle left 2hand opening. (Fig E) 4 M4x10mm flat-headed screw 2 2 3 M6x10mm wafer head screw 8 Attach feetflat-headed (C) using 4 M5x6mm screw A 8 5 5 5/32 screw (3)x18mm (Figwood F) screw 19 D 3 E D Fig F) 3 1. (Left) 3 D 4 3 3 5 4. BLIND 4. 5. 1 C 1. 5. B Fig G) STEP 5 3. A Secure the feet (C) K LIST 3 to the base (A) using screw (4) QTY (Fig G) 4. 2 4 crew 2 3 crew 8 rew 8 5 rew 19 E 10” (256mm) 2. D 5 7-1/4 ” (184mm) 2 4 4 2 D 5. 1 12” (305mm) 4. 4 A Fig H1) (Left) STEP 6 3. Attach hooks (Orion Gray version only) (Fig H1) and hang the baskets as shown. (Fig H2) NOTE: Baskets show in forward position. They can be moved to the rearward position for additional clearance. Bottom basket must hang from the 2nd wire from the top. 4 4 5 12” (305mm) 10” (256mm) Attach Hooks (Orion Gray): 5. 4. 1. Fig H2) E 7-1/4 ” (184mm) 1 1 1 1 4 (Left) B 2 DOOR 1 3. E C 14” (357mm) K LIST QTY 3. C Fig E) 5 l 20141120-B02 7-1/4” (184mm) 10” (256mm) 5 l 2. Item No. 5PSP-18 D 2 1 4 1/2 4 7 Door Opening Full Height Blind Left B 5PSP-18 (RIGHT HANDED DOOR/18” OPENING) A Door Opening 1 2 3 4 5 (Right) 2 Handle Mount Base (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Note: If installing into a face M5x6mm flat-headed screw 8 5 frame cabinet, Slide Base A 5/32 x18mm wood screw 19 2. BLIND Faceframe No. 5PSP-15 m 1. 3 B 2 QTY 4. 2 To front of cabinet 14” (357mm) 12” (305mm) 1 From Door Opening C 1 1 Base CK LIST 1 Frame n QTY 1 Foot 1 2 2. 1 Guide channel 1 STEP 2 1 Basket 4 1 Attach 2 the base (A) with slide channel (d) to floor3of cabinet TINGS CHECK A el 1 (Fig B)LIST Description QTY 4 2 Handle Pre-starting the CK LIST NOTE: 3 4 is mounting screws (4) M4x10mm flat-headed screw 2 n QTYrecommended M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 screw 19 4. No. 7-1/4” (184mm) 10” (256mm) (Right) Description 1. D Fig A) must be flush with the face frame opening. ANELS CHECK LIST -15 E Door Opening FITTINGS CHECK LIST 3 STEP 1 Description QTY 7-1/4” (184mm) 10” (256mm) 2 (Right) C 1 5PSP-15 3 B Fig B) FITTINGS LIST 3 1 CHECK 2 4 A Description QTY l 1 7 6 2 4 Handle 4 M4x10mm flat-headed screw 2 K LIST 8 3 M6x10mm QTYwafer head screw 8 M5x6mm flat-headed screw 8 E 3. 5 3 DD D 4 A 1. (Left) (Left) Fig C) PANELS CHECK LIST QTY3 1 5 Description STEP Base Attach Handles.1 1 Frame K LIST 2-TIER (FIG C) Foot 1 2 QTY 1 Guide 1 1 channel 3-TIER (FIG D) Basket 4 1 B 3. A 4 C 1 A Optional Rear Handle 5. Position B 1. Fig D) BE 6 7 2 10” (256mm) D E 5 Full Height Blind Left Shown with adjacent cabinet 10” (256mm) 1 1 Guide channelDoor Opening 1 Basket 4 8 19 B 12” (305mm) C C 6 7 2 7-1/4 ” (184mm) Blind Portion Blind Portion of Cabinet of Cabinet 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening 2 2 A 2 7-1/4 ” (184mm) ew ew ew B Frame ew 19 C Foot 7-1/4” (184mm) 10” (256mm) 2 2 8 PANELS CHECK LIST Description QTY 1 A8 Base 5 Item No. 5PSP-15 4 1 Forward Handle 12” (305mm)Position 1 3-TierDHandle Position 5. 2/2 800-626-1126 | rev-a-shelf.com D E 20B-02114102 2. C 15 STEP 4 E 2. 2 Attach feet (C) using A screw (3) (Fig F) 3 3 3 B 4 D ”4/1-7 )mm652( ”01 )mm481( 3 3 2 5 4. BLIND (Left) 4. )mm753( ”41 STEP 5 5. B .3 E 10” (256mm) 2 1. C Fig G) 5. 1 DOOR 1 E Fig F) .1 D A Secure the feet (C) 7-1/4 ” (184mm) K LIST 3 to the base (A) using screw (4) QTY (Fig G) .5 2 4 crew 2 crew 8 rew 8 5 rew 19 2 .4 4 Fig H1) Fig H2) (Left) Attach Hooks (Orion Gray): Attach hooks (Orion Gray version only) (Fig H1) and hang the baskets as shown. (Fig H2) NOTE: Baskets show in forward position. They can be moved to the rearward position for additional clearance. Bottom basket must hang from the 2nd wire from the top. 4 D .4 1 4 A 4 STEP 6 5 D 12” (305mm) 1. .5 3. 10” (256mm) 5 .2 3. D 4 1 1 1 1 4 C B B Adjust front wheel position for right hand opening. (Fig E) K LIST QTY l 1 .3 4 7-1/4 ” (184mm) 1 1 1 1 4 K LIST QTY 2 crew 2 crew 8 crew 8 crew 19 5 3. Fig E) K LIST QTY l .2 5 D E 2 1 12” (305mm) 2/1 4 9 12400 Earl Jones Way, Louisville, KY 40299 (800) 626-1126 www.rev-a-shelf.com 10 800-626-1126 | rev-a-shelf.com 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLATION SISTEMA DE CIERRE SUAVE CROMADO PARA ORGANIZADOR DE ESQUINA CIEGO 5PSP SYSTÈME 5PSP DE RANGEMENT POUR COIN MORT EN CHROME AVEC FERMETURE EN DOUCEUR Lista de partes: Liste des pièces: Item No. 5PSP-15 1 1 PANELS CHECK LIST 8 QTY Item No. 5PSP-15 4 Description A 11 Base 11 1 44 Frame #2 LIST 88 #2 1 PANELSBCHECK C Foot Description QTY 1 1 1 1 Base D Guide 7 channel 1 A3 E 1Basket 16 32 64 3 4 #2 #2 1 Frame 16 8 FITTINGS CHECK LIST 7 7 Foot 1 2 Description QTY 64 64 D Guide channel 1 1 Handle Basket 2 M4x10mm flat-headed4screw E Tiempo estimado de ensamblado 2 2 3 M6x10mm 5 wafer head screw 8 DuréeFITTINGS de5 l’installation: CHECK LIST 4 M5x6mm 8 flat-headed screw 38 16 B #2 Description QTY #1 5 5/32 55 55 x18mm wood screw 19 1 2 11 22 2 2 8 8 B A B 3 32 7 64 CC 5 5 16 E (Left) D 5 1 2 Limpie con un paño húmedo y seque las partes. Nettoyer avec un chiffon humide et essuyer pour sécher complètement. D 6 Para 18” 8 1” 1” 5PSPSC-15 (15” de Apertura) 14 Puerta para mano derecha 5PSPSC-15 (Ouverture de 38.1cm (15”)) Porte vers le côté droit 5PSPSC-18 (18” de Apertura) 16 Puerta para mano izquierda 5PSPSC-18 (Ouverture de 45.7cm (18”)) 2. Porte vers le côté gauche 5PSPSC-18 (18” de Apertura) 18 Puerta para mano derecha 12” (305mm) 5PSPSC-18 (Ouverture de 45.7cm (18”)) Porte vers le côté droit 1 90˚ 2” # Manija / Poignée 2 1” 2 3 Tornillo de cabeza tipo barquillo M6x10mm Vis à tête avec rondelle M6x10mm 8 4 2 plana M5x6mm Tornillo de cabeza Vis à tête plate M5x6mm 8 5 Tornillo de madera de 5/32 x18mm 1 Vis à bois 5/32x18mm 19 6 Perno de hombro / Boulon à épaulement 2 7 Rueda / Roue 2 8 Ganchos (sólo versión Gris Orion) Crochets (version gris Orion seulement) 8 90˚ 90˚ des pièces du Panneau: 12”Liste (305mm) B 90˚ Tornillo de cabeza plana M4x10mm Vis à tête plate M4x10mm 2 2 Lista de partes del panel: Descripción /1. Description 10” (256mm) 2” 2” 12 Puerta para mano 1” izquierda 5PSPSC-15 (Ouverture de 38.1cm (15”)) Porte vers le côté gauche (Left) Lista de partes de ajuste: Liste des pièces pour le Raccord: 7-1/4 ” (184mm) 2” F Pour 15” 7 Opciones de instalación: Options pour l’Installation: D 5 8 4 3 M6x10mm wafer head screw 4 M5x6mm flat-headed screw Cuidado/ Entretien: 3 5 5/32 x18mm wood screw 19 8 (Left) 5PSPSC-15 (15” de Apertura) 20141120-B01 A Descripción / Description # A Base/ Base 1 B Marco/ Cadre 1 C Pie/ Pied 1 D E 3. F Canal Guía/ Canal de guidage 12” (305mm) Canasta/ Panier Canasta fondo sólido/ Panier fond solide 5 D 1 4o6 4 ou 6 I-5PSPSC-1219 10” (256mm) 1 Handle 16 16 45 MIN 88 2 M4x10mm flat-headed screw #1 #1 5PSP3-XXSC-CR 7-1/4 ” (184mm) #1 Tercer nivel 3 niveaux 3 4 B Segundo nivel 2 niveaux 10” (256mm) #2 B 33 C 32 32 33 88 2 C 1 8 7-1/4 ” (184mm) 3 #2 8 1 5PSP-XXSC-CR 4 1 5 K LIST QTY 2 crew 2 crew 8 crew 8 crew 19 Door Opening Full Height Blind Right 2 B Full Height Blind Right APersiana Door Opening (Left) Full Height Blind Left 5PSP-15 (APERTURA DE PUERTA PARA MANO IZQUIERDA/15”) 5PSP-15 (PORTE VERS LE CÔTÉ GAUCHE/OUVERTURE DE 15”) Door Opening Puerta/ Porte Door Opening 5 Shown with adjacent cabinet Blind Portion of Cabinet Blind Portion of Cabinet 8 19 Door Opening Full Height Blind Left Shown with adjacent cabinet Coin mort 3 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening Door Opening E Door Opening D 4 5 1 Base de montaje (Fig A) 1. (Left) Fig A) 2. Nota: Si está instalando dentro de un gabinete con marco, la base del deslizante A, debe (Left) estar al ras con la apertura del marco Persiana Coin mort 1. 10” (256mm) Montez la base (Fig A) 10” (256mm) l 1 1 1 1 4 1 2 7-1/4 ” (184mm) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant 3 B 7-1/4 ” (184mm) 4 QTY 2 4. 1 Cara del marco 12” (305mm) Cadrage avant Al frente del gabinete 12” (305mm) Vers l’Avant de l’Armoire 4 De la apertura de la puerta À Partir de l’Ouverture de la Porte 2 Sujete la base (A) con el canal ANELS CHECK LIST -15 de guía (d) al piso del gabinete PANELSSujete CHECK LIST las manijas Description QTY Fixez les poignées. 5 D C B 5 A 3. E 4 D A 5. Posición opcional de la manija trasera Position en Option de la Poignée Arrière Fig C) 1 1 Base Segundo nivel (FIG C) 2 niveaux 1 Frame K LIST Foot 1 2 QTY 1 Guide 1 1 channel 4 Tercer nivel (FIG D) Basket 43 niveaux 1 FITTINGS LIST 1 CHECK 2 Description QTY7 l 1 6 2 4 Handle M4x10mm flat-headed screw 2 K LIST 3 M6x10mm wafer head screw 12 8 QTY M5x6mm 2 flat-headed screw 8 B 1 D B Fig D) (Left) 6 (Left) 7 A D 5 E B 4 2 B A Posición de la manija delantera Position de la (305mm) poignée12” avant 4 800-626-1126 | rev-a-shelf.com 5. 12” (305mm) 1. C 1. C 3 5 6 7 10” (256mm) 1 Base CK LIST Nota: Se recomienda pre iniciar 1 nFrameQTYcon1los cuatro tornillos de Foot 1 2 montaje. 1 Guide channel 1 1 Basket Fixez la base4(A) avec le canal 1 de la2 coulisse (d) au plancher TINGS CHECK LIST (Fig B)3 A el 1 de l’armoire Description 4 Remarque:QTY Il est recommandé 2les emplacements Handle de préparer CK LIST 3 4 (4) M4x10mm flat-headed des screw vis de montage 2 n QTY M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 m screwNo.85PSP-15 5 screw 19 3 C Fig B) 3. 1 7-1/4 ” (184mm) QTY 10” (256mm) Description (Fig B) 7-1/4 ” (184mm) No. 5PSP-15 A 1 22 2 E Posición de la manija D de tres2 niveles Position de la poignée à trois niveaux 1/2 D 1 Item No. 5PSP-18 PANELS CHECK LIST Description QTY A B C D E Base Frame Foot Guide channel Basket 4 2. 2 B 2. 3. D 1 Handle volante para apertura2de mano 4 2 M4x10mm flat-headed screw 2 izquierda (Fig E) 3 M6x10mm wafer head screw 8 4 M5x6mm flat-headed screw 8 Sujete el x18mm pie (C) usando 5 5/32 wood screw 19 el 3. E A 3. C Fig E) 1 FITTINGS CHECK LIST 3 QTY del Ajuste laDescription posición frontal K LIST tornillo (3) (Fig F) QTY 1 3 5 D C Fig F) 1. B (Left) Réglez la position de la roue avant pour une ouverture vers la gauche. (Fig E) 3 B 2 Fixez les pieds (C) en A utilisant la vis (3) (Fig F) 3 3 QTY 13 K LIST QTY 1 21 4 crew 21 5 2 lcrew 81 Asegure el pie (C) a laAbase (A) tornillo (4) (Fig G) rew 84 usando 5 Krew LIST19 3 4. E B C 2 Persiana Coin mort 14” (357mm) D Puerta/ Porte 5. 1 4. 5. E Fig G) Fixez les pieds (C) à la base (A) Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio adicional. La canasta inferior 4. debe colgar del segundo cable de la parte superior. D D 4 5 5. 4 (Left)4. 4 1. A Fig H1) 2 Fig H2) Fije los ganchos (sólo versión12” Gris(305mm) Orion) 5. Attacher les crochets (version gris Orion seulement) 1 7-1/4 ” (184mm) Attacher les crochets (version gris Orion seulement) (Fig H1) et suspendre les paniers comme indiqué (Fig H2). Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du haut. 1. (Left) 10” (256mm) Gris Orion) (Fig3 H1) y cuelgue las cestas como se muestra. (Fig H2) 3. 7-1/4 ” (184mm) 2. de la vis (4) (Fig G) QTY à l’aide 2 4 crew 2 crew 8 6 rew 8 5 4. rew 19 Fije los ganchos (sólo versión 10” (256mm) 1 1 1 5 l 1 K LIST4 1 1 1 1 4 2. 20141120-B02 2. 7-1/4” (184mm) 10” (256mm) 5 12” (305mm) 2 E 4 12” (305mm) 1 4 3. 4 1/2 5 3. D 13 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening C D E Foot 1 Puerta/ Porte Guide channel 1 Basket 4 (Right) Full Height Blind Left Shown with adjacent cabinet C 1 2 B 5PSP-15 (APERTURA DE PUERTA PARA MANO DERECHA/15”) 5PSP-15 (PORTE VERS LE CÔTÉ DROIT/OUVERTURE DE 15”) Door Opening A (Right) Fig A) 2 Handle Base de montaje (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Nota: Si está instalando dentro M5x6mm flat-headed screw 8 5 de un gabinete con marco, la 5/32 x18mm wood screw 19 1. D 2. Persiana Coin mort base del deslizante A, debe estar al ras con la apertura del marco (Right) Cara del marco Cadrage avant 7-1/4” (184mm) 10” (256mm) Montez la base (Fig A) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant E Door Opening FITTINGS CHECK LIST 3 1 Description QTY 1 2 3 4 5 5 7-1/4” (184mm) 10” (256mm) Full Height Blind Left Persiana Blind Portion Coin mort of Cabinet 8 19 Door Opening 7-1/4” (184mm) 10” (256mm) 4 screwItem No. 2 5PSP-15 screw PANELS 8 CHECK LIST QTY screw 8Description 5 1 A Base 1 Frame screw B 19 1. 3 B 2 4. 2 Al frente del gabinete 12” (305mm)1 Vers l’Avant de l’Armoire 12” (305mm) De la apertura de la puerta À Partir de l’Ouverture de la Porte 4 2 3. Sujete la base (A) con el canal ANELS CHECK LIST -15 de guía (d) al piso del gabinete Description 1 (Fig B) QTY FITTINGS LIST 3 1 CHECK 2 4 Description QTY 7A 6 l 1 2 4 Handle 4 M4x10mm flat-headed screw 14 2 K LIST 3 M6x10mm QTYwafer head screw 8 A B C 3. 5 D 3 E 4 A Posición opcional de la manija trasera Position en Option de la Poignée Arrière Fig C) 1 Fig D) 3 (Left) A D B 5. 6 7 D (Left) B 6 7 E 2 B Posición de la manija delantera Position de la poignée avant 800-626-1126 | rev-a-shelf.com 5.12” (305mm) C 1. C 10” (256mm) poignées. 1nivel (FIG C) Base Fixez les Segundo 2 niveaux 1 Frame K LIST Foot 1 2 QTY 1 Guide 1 1 channel Tercer nivel (FIG D) Basket 43 niveaux 1 B 1. 22 A 1 Posición de la manija 2 de tres niveles D Position de la poignée à trois niveaux 2/2 2 7-1/4 ” (184mm) 1 Base CK LIST Nota: Se recomienda pre iniciar 1 Frame n QTYcon 1los cuatro tornillos de Foot 1 2 1 montaje. Guide channel 1 1 Basket Fixez la base4(A) avec le canal 1 de la2 coulisse (d) au plancher TINGS CHECK LIST (Fig B)3 A el 1 de l’armoire Description QTY 4 Remarque: Il est recommandé 2les emplacements Handle CK LIST de préparer 3 4 (4) M4x10mm flat-headed 2 des screw vis de montage n QTY M6x10mm wafer head screw 8 2 M5x6mm 4. flat-headed screw 8 5 4 d screw 2 5/32 wood screw 19 m x18mm No. 5PSP-15 d screw 8 screw 8 5 3 PANELS screw 19 CHECK LIST QTY 1 Sujete las manijas 5 Description C Fig B) 10” (256mm) 2. -1/4 ” 4mm) No. 5PSP-15 E 20B-02114102 2. 3. C Fig E) 4 .3 E 2. 3 Sujete el pie (C) usando el C B 3 C Persiana 4. mort Coin 1 B Puerta/ Porte 5. )mm753( ”41 D 4. 5. E Fig G) .3 1. D (Left) 10” (256mm) 5 (Left) .4 7-1/4 ” (184mm) 4 4 Fig H1) A 2 Fig H2) Fije los ganchos (sólo versión12” Gris Orion) (305mm) D 1. 1 7-1/4 ” (184mm) 4 E 2 1 12” (305mm) 3. 2/1 5 D .4 4 10” (256mm) Attacher les crochets (version gris Orion seulement) Attacher les crochets (version gris Orion seulement) (Fig H1) et suspendre les paniers comme indiqué (Fig H2). Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du 4 haut. E 3 2 Gris Orion) (Fig H1) y cuelgue las cestas como se muestra. (Fig H2) Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio adicional. La canasta inferior debe colgar del segundo cable de la parte superior. Fig F) 3 ”4/1-7 )mm652( ”01 )mm481( Fixez K LIST 3 les pieds (C) à la base (A) QTY à l’aide de la vis (4) (Fig G) 2 4 crew 2 crew 8 6 .5 rew 8 5 Fije los ganchos (sólo versión rew 19 .1 B Réglez la position de la roue avant pourDl’ouverture vers la droite (Fig E) 2 Fixez les pieds (C) en A utilisant la vis (3) (Fig F) LIST KKLIST 3 QTY 1 4 21 4 crew 21 5 crew 81 2 el pie (C) a laAbase (A) lrew 81 Asegure 5 usando tornillo (4) (Fig G) 4 rew 19 .2 D K LIST tornillo (3) (Fig F) QTY5 1 1 1 1 1 4 B 3. Ajuste la posición frontal del volante para apertura de mano izquierda (Fig E) 5 l5 .2 15 .5 1 QTY 192 2 8 8 19 2 4 Door Opening Door Opening A Full Height Blind Right 3 4 Door Opening Full Height Blind Right Full Height Blind Left Shown with adjacent cabinet 5 2 3 4 5 D M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 M5x6mm flat-headed screw 8 5/32 x18mm wood screw 19 4 5 Full Height Blind Left (Left) Shown with adjacent cabinet 5PSP-18 (APERTURA DE PUERTA PARA MANO IZQUIERDA/18”) D 5PSP-18 (PORTE VERS LE CÔTÉ GAUCHE/OUVERTURE DE 18”) Blind Portion of Cabinet Blind Portion Persiana of Cabinet Coin mort Door Opening Door Opening Puerta/ Porte Door Opening 5 E Door Opening 1 Base de montaje (Fig A) Door Opening Door Opening 1. Fig A) (Left) 1. (Left) Nota: Si está instalando dentro de un gabinete con marco, la base del deslizante A, debe estar al ras con la apertura del marco 2. 7-1/4” (184mm) 10” (256mm) Persiana Coin mort B Montez la base (Fig A) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant 7-1/4” (184mm) 10” (256mm) 21 1 21 84 IST 8 2 1 14” (357mm) Cara del marco Cadrage avant 3 2 4. 1 Al frente del gabinete 14” (357mm) Vers l’Avant de l’Armoire De la apertura de la puerta À Partir de l’Ouverture de la Porte 4 No. 5PSP-15 Fig B) 3. 2 Sujete la base (A) con el canal ANELS CHECK -15 de guíaLIST (d) al piso del gabinete C 1 5 D A Posición opcional de la manija trasera Position en Option de la Poignée Arrière D D B 5. Fig C) m No. 5PSP-15 5 DA Fig D) 6 7 4 1 1 Base Segundo nivel (FIG C) 2 niveaux 1 Frame K LIST Foot 1 2 QTY 1 4 Guide 1 1 channel Tercer nivel (FIG D) Basket 43 niveaux 1 FITTINGS LIST 3 1 CHECK 2 7 6 Description QTY A l 1 4 6 7 1 (Left) (Left) E B 2 C A B 5. Posición de la manija delantera Position de la poignée avant 800-626-1126 | rev-a-shelf.com 12” (305mm) C 1. A 10” (256mm) 2les emplacements Handle CK LIST de préparer 3 des vis de montage 4 (4) M4x10mm flat-headed screw 2 n QTY M6x10mm wafer 2 head screw 8 M5x6mm flat-headed screw 4 8 d screw 2 5 5/32 x18mm8wood screw 19 d screw 2 2 E 4 de l’armoire (Fig B) 4 Handle 16 M4x10mm screw K LIST flat-headed 3 C B el TINGS CHECK LIST 1 3 A Description 4 Remarque:QTY Il est recommandé screw 8 5 3 screw 19 PANELSSujete CHECK LIST las manijas QTY Fixez les poignées. 5 Description B 3. 1. 22 1 Posición de la manija 2 de tres niveles Position de la poignée D à trois niveaux 2 1/2 7-1/4 ” (184mm) 1 Base CK LIST Nota: Se recomienda pre iniciar 1 tornillos de nFrameQTYcon1los cuatro Foot 1 montaje. 1 2 Guide channel 1 1 Fixez la base (A) avec le canal Basket 1 de la 4 (d) au plancher 2 coulisse 10” (256mm) QTY 7-1/4 ” 84mm) (Fig B) Description E 2. Item No. 5PSP-18 Guide channel Basket 4 1 1 1 1 4 FITTINGS CHECK LIST Description QTY B Fig E) 2. 2 2. 3. 3 Ajuste la posición frontal del 2 1 Handle volante para apertura de mano 4 2 M4x10mm flat-headed screw 2 izquierda (Fig E) screw 8 3 M6x10mm wafer head 4 M5x6mm flat-headed screw 8 3. E A D 3 5 5 5/32 wood screw 19 el Sujete el x18mm pie (C) usando K LIST tornillo (3) (Fig F) QTY 1 Réglez la position de la roue 1 avant pour une ouverture vers 1 la gauche. (Fig E) (Left) 1. B 3 B 5 1 2 Fixez les pieds (C) en utilisant A l 1 la vis (3) (Fig F) K LIST4 QTY 13 K LIST 4. Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio 4. adicional. La canasta inferior debe colgar del segundo cable de la parte superior. B C 2 Persiana 5. Coin mort 1 14” (357mm) Puerta/ Porte D 4. 5. E Fig G) 3. D 1. (Left) D 5 4 5. 4 (Left)4. 4 1. A Fig H1) Fig H2) Fije los ganchos (sólo versión12” Gris Orion) 5.(305mm) Attacher les crochets (version gris Orion seulement) Attacher les crochets (version gris Orion seulement) (Fig H1) et suspendre les paniers comme indiqué (Fig H2). Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du haut. E 2 1 10” (256mm) Fije los ganchos3 (sólo versión Gris Orion) (Fig H1) y cuelgue las cestas como se muestra. (Fig H2) 3 3 1 QTY 21 5 4 2 crew 21 lcrew 81 Asegure el pie (C) a laAbase (A) tornillo (4) (Fig G) rew 84 usando 5 Krew LIST19 Fixez 3 les pieds (C) à la base (A) 2. de la vis (4) (Fig G) QTY à l’aide 2 4 crew 2 crew 8 rew 8 5 4. 6 rew 19 D C Fig F) 10” (256mm) Base Frame Foot 3. C 7-1/4 ” (184mm) A B C D E 2. 1 7-1/4 ” (184mm) PANELS CHECK LIST Description QTY 20141120-B02 7-1/4” (184mm) 10” (256mm) 5 12” (305mm) 2 E 4 12” (305mm) 1 4 3. 4 1/2 5 3. D 17 Door Opening Full Height Blind Left Persiana Blind Portion Coin mort of Cabinet D E 1 1 Puerta/ Porte Guide channel 1 Basket 4 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening 5 Full Height Blind Left Shown with adjacent cabinet 2 (Right) C 1 B 5PSP-18 (APERTURA DE PUERTA PARA MANO DERECHA/18”) 5PSP-18 (PORTE VERS LE CÔTÉ DROIT/OUVERTURE DE 18”) A Door Opening (Right) 2 Handle Base de montaje (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Nota: Si está instalando dentro M5x6mm flat-headed screw 8 5 de un gabinete con marco, la 5/32 x18mm wood screw 19 1. D Fig A) 2. Persiana Coin mort base del deslizante A, debe estar al ras con la apertura del marco (Right) Cara del marco Cadrage avant 7-1/4” (184mm) 10” (256mm) Montez la base (Fig A) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant E Door Opening FITTINGS CHECK LIST 3 1 Description QTY 1 2 3 4 5 8 19 7-1/4” (184mm) 10” (256mm) ew ew ew B Frame ew 19 C Foot 7-1/4” (184mm) 10” (256mm) 2 2 8 PANELS CHECK LIST Description QTY 1 A8 Base 5 Item No. 5PSP-15 4 1. 3 B 2 4. 2 Al frente del gabinete 14” (357mm) Vers l’Avant de l’Armoire 12” (305mm) 1 De la apertura de la puerta À Partir de l’Ouverture de la Porte 4 2 3. Sujete la base (A) con el canal ANELS CHECK LIST -15 de guía (d) al piso del gabinete 1 Base CK LIST Nota: Se recomienda pre iniciar 1 nFrameQTYcon 1los cuatro tornillos de Foot 1 2 1 montaje. Guide channel 1 1 Basket Fixez la base4(A) avec le canal 1 de la2 coulisse (d) au plancher TINGS CHECK LIST (Fig B)3 A el 1 de l’armoire Description QTY 4 Remarque: Il2est recommandé Handle CK LIST de préparer 3 les emplacements 4 M4x10mm flat-headed screw 2 n QTYdes vis de montage (4) M6x10mm wafer head screw 8 2 M5x6mm 4. flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 dm screw No.85PSP-15 3 screw 8 5 3 screw 19 PANELSSujete CHECK LIST las manijas QTY 1 Fixez les poignées. 5 Description 1 Base Segundo nivel (FIG C) 2 niveaux1 Frame K LIST Foot 1 2 QTY 1 Guide 1 1 channel Tercer nivel (FIG D) Basket 43 niveaux 1 4 FITTINGS 1 CHECK 2 73 6 LIST Description QTY A l 1 4 18 Handle M4x10mm flat-headed screw K LIST 3 2 2 4 C Fig B) 1 B 3. A C 5 D B 3 E 4 A Posición opcional de la manija trasera Position en Option de la Poignée Arrière 6 7 1 (Left) A D B 5. Fig C) D Fig D) (Left) 6 7 E B 2 C B Posición de la manija delantera Position de la poignée avant 5. 800-626-1126 | rev-a-shelf.com 12” (305mm) 1. C 1. 10” (256mm) (Fig B) QTY 22 A 1 Posición de la manija 2 de tres niveles Position de la poignée à trois niveaux D 2/2 2 7-1/4 ” (184mm) Description 10” (256mm) 2. 1/4 ” mm) No. 5PSP-15 E 3. Fig E) .3 4 E 2. 3 C 3 les pieds (C) à la base (A) Fixez à l’aide de la vis (4) (Fig G) 4 3 2 C 4.mort Coin 1 B Puerta/ Porte E ”4/1-7 )mm652( ”01 )mm481( 3 Persiana A 3 B 3 1 Asegure el pie (C) a la base (A) 5 usando tornillo (4) (Fig G) Fig F) .1 B Réglez la position de la roue avant pourDl’ouverture vers la droite (Fig E) 2 Fixez les pieds (C) en A utilisant la vis (3) (Fig F) 5 .2 D Sujete el pie (C) usando el 4 2 B 3. Ajuste la posición frontal del volante para apertura de mano izquierda (Fig E) K LIST tornillo (3) (Fig F) QTY5 1 5. )mm753( ”41 D 4. 5. E Fig G) .3 D (Left) 1. 5 D Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio adicional. La canasta inferior debe colgar del segundo cable de la parte superior. 4 (Left) 4 Fig H1) .4 A 2 Fig H2) Fije los ganchos (sólo versión 12” Gris(305mm) Orion) Attacher les crochets (version gris Orion seulement) Attacher les crochets (version gris Orion seulement) (Fig H1) et suspendre les paniers comme indiqué (Fig H2). Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du 4 haut. 10” (256mm) .5 5 Fije los ganchos (sólo versión Gris Orion) (Fig H1) y cuelgue las cestas como se muestra. (Fig H2) 7-1/4 ” (184mm) 6 1. 4 1 .5 2 E 1 12” (305mm) 3. 2/1 5 D .4 4 10” (256mm) 1 1 1 l5 1 4 K LIST K LIST QTY QTY 421 crew 21 crew 81 lcrew 81 4 crew 19 K LIST QTY 2 crew 2 crew 8 rew 8 rew 19 .2 C 7-1/4 ” (184mm) 15 20B-02114102 2. 19 12400 Earl Jones Way, Louisville, KY 40299 (800) 626-1126 www.rev-a-shelf.com ">
Link pubblico aggiornato
Il link pubblico alla tua chat è stato aggiornato.
