INSTALLATION MANUAL PRODUCT NAME : Medium ALPHA Round - Gear Medium ALPHA Round Snoot - Gear lll * *** IP66 1 1. 220-240V~ 50-60Hz 5925-A/B/D/H/N-3-537-XX * 2. 5925-A/B/D/H/N-3-538-XX * 3. 5925-A/B/D/H/N-3-539-XX * 4. 5925-A/B/D/H/N-3/4/5-534-XX * 5. 5925-A/B/D/H/N-3/4/5-535-XX * 6. 5925-A/B/D/H/N-3/4/5-536-XX * 7. 5968-A/B/6-3-537-XX * 8. 5968-A/B/6-3-538-XX * 9. 5968-A/B/6-3-539-XX * 10. 5968-A/B/6-3/4/5-534-XX * 11. 5968-A/B/6-3/4/5-535-XX * 12. 5968-A/B/6-3/4/5-536-XX * 13. 5925-A-3/4/5/A-767-XX * 14. 5925-B/C/D-3/4/5/A-506-XX * 15. 5925-A-3/4/5/A-768-XX * 16. 5925-B/C/D-3/4/5/A-887-XX * 17. 5925-A-3/4/5/A-769-XX * 18. 5925-B/C/D-3/4/5/A-891-XX * 19. 5925-A-3/4/5/A-710-XX * 20. 5925-B/C/D-3/4/5/A-505-XX * 21. 5925-A-3/4/5/A-719-XX * 22. 5925-B/C/D-3/4/5/A-902-XX * 23. 5925-A-3/4/5/A-720-XX * 24. 5925-B/C/D-3/4/5/A-905-XX * 25. 5925-B/D/H/N-6-686-XX * 5925-B/D/H/N-2-686-XX *** Medium ALPHA Round - Gear 102 300° 75° 258 90° 101 171 On-Off LED 18 W /Dim 1-10V 25W/ DALI 25W Medium ALPHA Round - Gear CVDA 102 300° 75° 700mA (Remote driver) ( Output from SELV system only) ( ¡ÃÐáÊ俵ͧÁÒ¨Ò¡Ãкºáç´Ñ¹ä¿¿Ò µèíÒ¾ÔàÈÉ¢Ñé¹»ÅÍ´ÀÑÂà¾Õ§à·Ò¹Ñé¹) 251 90° 26. Constant Current 83 130 DALI RGBW 24W (Remote Driver) Medium ALPHA Round - Gear (DMX) 102 360° 75° 300 90° 138 210 DMX RGBW 24W Medium ALPHA Round Snoot - Gear 253 30° 300° R + B + - + 1-12 Light Emitting Diodes (LED) - 13-24 Light Emitting Diodes (LED) Last Revised On :27/09/2023 REV.06 258 + W û121 75° - û130 Ordering Code û130 Input voltage û130 No. G 105 + 175 - 25-26 Light Emitting Diodes (LED) 1/6 On-Off LED 18 W /Dim 1-10V 26W/ DALI 26W Unit:mm. FR-DM-17 REV.03 EFF 15/09/17 2 For On-Off System. 3 194 162 24 ÊíÒËÃѺÃкºà»´-»´ 80 2.1 2.2 22.5 22.5 Round - Gear Round Snoot - Gear 2.3 16.5 44 Round - Gear (DMX) 56 Drilling distance ÃÐÂСÒÃà¨ÒÐ Round - Gear CVDA Use the rubber seal according to the size of the cable. àÅ× Í¡ãª ÅÙ¡ÂÒ§à¤àºÔÅá¡Åç ¹´ µÒÁ¢¹Ò´¢Í§ÊÒÂä¿ Cable size : ¢¹Ò´ÊÒÂä¿ Rubber seal size ÅÙ¡ ÂÒ§à¤àºÔÅ á¡Åç ¹ ´· Õè㪠9 Cable size dia Ø 8-9 mm. ¢¹Ò´ÊÒÂä¿ with washer. áËǹÃͧ Use appropriate installation material depending on installation conditions. àÅ×Í¡Ê¡ÃÙáÅÐÍØ »¡Ã³ ÂÖ´¨Ñº·ÕèàËÁÒÐÊÁ ¡Ñº¾×é¹·ÕèáÅлÃÐàÀ·¡ÒõԴµÑé§ D L dia 9 mm. 13 Cable size dia Ø12-13 mm. ¢¹Ò´ÊÒÂä¿ with washer. áËǹÃͧ Cable gland M20x1.5 à¤àºÔÅ á¡Åç¹´ dia 11 mm. Torque/áçºÔ´ : 1.0 Nm. dia 13 mm. D L Ø 7 mm./ÁÁ. 37 mm./ÁÁ. L H Ø 4 mm. Ø 9 mm. L 38 mm. Make sure that cable glands are tightened. µÍ§¢Ñ¹à¤àºÔéÅ á¡Å¹´ãËá ¹¹·Ø¡¨Ø´ 11 Cable size dia Ø 10-11 mm. ¢¹Ò´ÊÒÂä¿ with washer. áËǹÃͧ Screw size ¢¹Ò´Ê¡ÃÙ à¡ÅÕ ÂÇ»ÅÍ H Wall plug anchor size ¢¹Ò´¾Ø¡½§¼¹Ñ § D 4.A Unit:mm. L Washer/ áËǹÃͧ Rubber seal/ ÅÙ¡ÂÒ§à¤àºÔÅá¡Åç¹´ Bush protected against dripping water. ºÙª»Í§¡Ñ¹¹éíÒ «ÖÁà¢Ò µÑÇâ¤Á N For On-Off System. ÊíÒËÃѺ Ãкºà»´-»´ 6 25 6 30 2 Cable size : 3X1.00 mm. Ø 8-13 mm. ¢¹Ò´ÊÒÂä¿ 4.B For 1-10V dimming and DALI system ÊíÒËÃѺÃкº´ÔÁ1-10VáÅÐÃкºDALI A A = 38-40 mm. B = 8-10 mm. C = 30-32 mm. 2 Cable Size/¢¹Ò´ÊÒÂä¿ : 5x1.00 mm. Ø8-13 mm. Green/Yellow : Brown : L Blue : N White : + Black : - B C N L For DALI System ÊíÒËÃÑ ºÃкº DALI 1:+ DA2 2:- + 1...10V Last Revised On :27/09/2023 REV.06 DA1 2/6 FR-DM-17 REV.03 EFF 15/09/17 4.C For Constant Current 700mA (Remote driver) / OD-5925 Warning Please ensure that the led lamp is connected to the driver correctly. Wrong polarity connection cause a damage to the led lamp and driver. â»Ã´ÃÐÇѧ¡ÒõÍÊÒÂä¿ÊÅѺ ¢ÑéÇ +ºÇ¡ -ź ¨Ò¡ä´ÃàÇÍÃÁÒà¢Ò·ÕèËÅÍ´ LED ËÒ¡µÍÊÅѺ¢ÑéÇ ¨Ð·íÒãËä´ÃàÇÍÃá ÅÐËÅÍ´ LED à¡Ô´¤ÇÒÁàÊÕÂËÒ lll 1 L Input/à¢Ò 220-240 V~ N + AC DC + - - Output/ÍÍ¡ 700mA ( Output from SELV system only) (¡ÃÐáÊ俵ͧÁÒ¨Ò¡Ãкºáç´Ñ¹ ä¿¿Ò µèíÒ¾ÔàÈÉ¢Ñé¹»ÅÍ´ÀÑÂà¾Õ§à·Ò¹Ñé¹ ) Distance from luminaire to Driver ÃÐÂзҧ¨Ò¡µÑÇâ¤Á¶Ö§ ä´ÃàÇÍà Luminaire Wattage Maximum number of luminaires Conductor size / ¢¹Ò´ÊÒÂä¿ ¨íҹǹâ¤Á㹡ÒÃµÍ Accessory available separately./ÍØ»¡Ã³àÊÃÔÁ¨íÒ˹ÒÂᡵҧËÒ¡ Ordering Code Product Name AUN-DRG-0017-01 RGBW LED Constant Current Driver 4x700mA 4x18W (DALI) in IP66 Aluminium Box with additional 10kV Surge protector. 24 W 1 luminaire 1.00 mm.2 1.50 mm.2 2.00 mm.2 20 m 30 m 40 m 4.D For DMX system ÊíÒËÃѺÃкºDMX 2 Cable size : 3X1.00 mm. Ø 8-13 mm. ¢¹Ò´ÊÒÂä¿ Green/Yellow : Brown : L Blue : N Cable UNITRONIC Li2YCYv (TP) Size 1x2x0.5 (JJ Lap) L 100 cm. DMX512/RDM Shield : Sh. White : DMX+ Brown : DMX- Input 220-240 V~ For Controler DMX Follow common DMX wiring practices such as termination,topology and cable specification »¯ÔºÑµÔµÒÁÇÔ¸Õ¡ÒÃà´Ô¹ÊÒ¢ͧ Ãкº DMX હ ¡ÒÃàª×èÍÁµÍ , Ãкºà¤Ã×Í¢Ò áÅÐ Ê໤¢Í§ÊÒÂä¿ 5 6 5.2 5.3 5.1 Installation complete µÔ´µÑé§àÊÃç¨ÊÁºÙó Torque/áçºÔ´ : 1.0 Nm. Last Revised On :27/09/2023 REV.06 3/6 FR-DM-17 REV.03 EFF 15/09/17 How to adjust the aiming angle. ÇÔ¸Õ¡ÒûÃѺͧÈÒ For vertical aiming. ÊíÒËÃѺ á¹ÇµÑé§ Torque/áçºÔ´ : 1.0 Nm. Installation complete µÔ´µÑé§àÊÃç¨ÊÁºÙó For horizontal aiming. ÊíÒËÃѺ á¹Ç¹Í¹ Torque/áçºÔ´ : 3.0 Nm. Installation complete µÔ´µÑé§àÊÃç¨ÊÁºÙó Remark : ËÁÒÂà赯 1. Installation should be carried out by a qualified electrician in accordance with appropriate national wiring regulation. ¡ÒõԴµÑé§â¤Áä¿¿ÒáÅÐÍØ»¡Ã³ ¤ÇôíÒà¹Ô¹¡ÒÃâ´ÂªÒ§ä¿¿Ò ·ÕèÁÕ¤ÇÒÁÃÙáÅФÇÒÁªíÒ¹Ò­ 㹡ÒõԴµÑé§ÍØ»¡Ã³ä¿¿Ò â´Â੾ÒеÒÁÁÒµÃฐÒ¹¢Í§¡ÒÃä¿¿Ò 2. Disconnect the power before changing the lamp. »´ÊÇÔ·ªä¿·Ø¡¤ÃÑ駷Õèà»ÅÕè¹ËÅÍ´ä¿ 3. For Class1 luminaire, the installation must be completed with earthing. ÊíÒËÃѺâ¤Áä¿·ÕèÁÕ¡Òûͧ¡Ñ¹ä¿¿Òà ÑèÇÃдѺ1 ¡ÒõԴµÑ駵ͧµÍÊÒ´ԹµÒÁÁÒµÃฐÒ¹¤ÇÒÁ»ÅÍ´ÀÑ´Ç 4. Do not exceed the maximum wattage. ËÒÁãªËÅÍ´ä¿·ÕèÁÕ¢¹Ò´Çѵµà¡Ô¹¡ÇÒ·ÕèÃÐºØ ËÃ×ÍãªËÅÍ´¼Ô´»ÃÐàÀ· 5. Don't touch LED while maintaining or cleaning. ËÒÁÊÑÁ¼ÑÊËÅÍ´ LED ¢³ÐºíÒÃاÃÑ¡ÉÒ ËÃ×Í·íÒ¤ÇÒÁÊÐÍÒ´ Warning : ¢Í¤ÇÃÃÐÇѧ 1. The manufacturer will not be liable or held responsible for any incorrect installation, misuse or improper use and unauthorised modification to the fittings. Failure to comply with mentioned warning may cause serious damage or serious injury to persons, animals or objects. If any modification is required please consult your dealer for the details. ·Ò§¼Ù¼ÅÔµäÁÊÒÁÒöÃѺ¼Ô´ªÍºã¹¤ÇÒÁàÊÕÂËÒÂã´æ·Õèà¡Ô´¨Ò¡¡Òà µÔ´µÑé§äÁ¶Ù¡ÇÔ¸Õ, 㪧ҹ¼Ô´»ÃÐàÀ·ËÃ×Í´Ñ´á»Å§µÑÇâ¤Áã¹·Ø¡¡Ã³Õ «Öè§ ÊÔ觼Դ»¡µÔàËÅÒ¹Õé ÍÒ¨·íÒãËà¡Ô´ÍѹµÃÒ¡Ѻ ¤¹ ÊÑµÇ ÊÔ觢ͧ ËÒ¡ÁÕ¢ÍʧÊÑÂËÃ×ÍÁÕ¤ÇÒÁµÍ§¡ÒûÃѺᵧµÑÇâ¤Á ãËàËÁÒÐÊÁ¡Ñº¡ÒÃ㪧ҹ ¡Ãس ÒµÔ´µÍµÑÇá·¹¨íÒ˹ÒÂËÃ×ͼټÅÔµ 2. Where damage has occured to the fittings, please make the replacement with standard parts before use. 㹡óշÕèÁÕªÔé¹Êǹ»ÃСͺã´à¡Ô´¤ÇÒÁàÊÕÂËÒ¡Ãس Òà»ÅÕ蹪Ôé¹ ÊǹãËÁ¡Í¹¡ÒÃ㪧ҹ·Ø¡¤ÃÑé§ à¾×èͤÇÒÁ»ÅÍ´ÀÑ For On-off System. ÊíÒËÃѺÃкºà»´-»´ Cable Size/¢¹Ò´ÊÒÂä¿ : 3x1.00 mm.2 Ø8-13 mm. In case the supply cable is exposed to sunlight use UV resistant cable. ¡Ã³Õ·ÕèÁÕ¡ÒõԴµÑé§â¤Á俹͡ÍÒ¤Òà ËÃ×Íâ¤Áä¿·ÕèÁÕ¡ÒÃá¼ÃѧÊÕÂÙÇÕ ÊÒÂ俵ͧÊÒÁÒö»Í§¡Ñ¹ ËÃ×Í ÁÕ¡Òûͧ¡Ñ¹äÁã˶١ÃѧÊÕÂÙÇÕä´ NO Last Revised On :27/09/2023 REV.06 Do not touch the LED because it may shorten the life time or the LED can be breaking down. ËÒÁÊÑÁ¼ÑÊËÅÍ´ LED â´Âà´ç´¢Ò´ à¾ÃÒШзíÒãËËÅÍ´àÊ×èÍÁÊÀÒ¾ 4/6 FR-DM-17 REV.03 EFF 15/09/17 Minimum distance to lighted surface. ÃÐÂÐËÒ§¢Ñé¹µèíÒ ¨Ò¡Ë¹Òâ¤Á¶Ö§¾×é¹¼ÔÇ·Õè¶Ù¡ÊͧÊÇÒ§ 0.5 m The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 0.5m in not expected. µíÒá˹§·ÕèµÔ´µÑ駴ǧâ¤Á¤ÇÃÍÂÙ㹨ش·ÕèáʧäÁÊͧà¢Ò´Ç§µÒâ´ÂµÃ§à»¹àÇÅÒ¹Ò¹ ËÒ¡à¢Òã¡Åã¹ ÃÐÂйÍ¡ÇÒ 0.5 Á. Any damaged safety glass cover must be replaced only with the original spare part. àÁ×èÍ¡ÃШ¡à¡Ô´¤ÇÒÁàÊÕÂËÒ à¾×èͤÇÒÁ»ÅÍ´ÀѤÇÃÊÑè§ÍÐäËÅá·¨Ò¡¼Ù¼ÅÔµà·Ò¹Ñé¹ Make sure the plug is secured tightly and note the ground level. ¾ÅØ¡µÍ§ÂÖ´ÍÂҧṹ˹ÒáÅÐàÊÁ͡Ѻ¼ÔǾ×é¹ Not using chemical compounds and aggressive agents such as , weed repellents fertilizers , acid solvent and contaminated irrigation water near the Luminaires. ËÒÁãªÊÒÃà¤ÁÕહ »ØÂ, ÂÒ¡íҨѴÈѵÃپת, »Ù¹¢ÒÇ, ÊÒÃÅÐÅÒ·Õè໹¡Ã´ áÅйéíÒ»¹à»Í¹ÊÒÃà¤ÁÕ ºÃÔàdz·ÕèµÔ´µÑé§â¤Áä¿ NO Our products are installed with electronic components with the protection against overvoltage according to IEC 61547. The customers have to install the additional overvoltage protection devices (against surge, transients, etc) in their electrical system to avoid the risk of damage. Failing to do so will end the product warranty. ¼ÅÔµÀѳ±¢Í§àÃÒÁÕ¡ÒõԴµÑé§ÍØ»¡Ã³ÍÔàÅç¡·Ã͹ԡÊÊíÒËÃѺ¡Òûͧ¡Ñ¹áç´Ñ¹ä¿à¡Ô¹µÒÁÁÒµÃฐÒ¹ IEC 61547 áÅÐÅÙ¡¤ÒµÍ§µÔ´µÑé§ÍØ»¡Ã³»Í§¡Ñ¹áç´Ñ¹ä¿à¡Ô¹à¾ÔèÁàµÔÁ (»Í§¡Ñ¹ä¿¡ÃЪҡ ,ä¿¿ÒÅѴǧ¨Ã ÏÅÏ)ã¹Ãкºä¿¿Ò´Ç à¾×èÍËÅÕ¡àÅÕ觤ÇÒÁàÊÕ觷Õè¨Ðà¡Ô´¤ÇÒÁàÊÕÂËÒ ËÒ¡äÁ´íÒà¹Ô¹¡Òôѧ¡ÅÒÇ ¡ÒÃÃѺ»ÃСѹ¨ÐÊÔé¹Êشŧ LED NO NO Last Revised On :27/09/2023 REV.06 Clean the products regularly to maintain good light output and prolong surface quality . Only use solvent-free cleaning solutions on the products. ·íÒ¤ÇÒÁÊÐÍÒ´¼ÅÔµÀѳ ±à»¹»ÃШíÒà¾×èÍÃÑ¡ÉÒ¤ÇÒÁÊͧÊÇÒ§·Õè´ÕáÅÐÂ×´ÍÒÂؤسÀÒ¾¾×é¹¼ÔÇ ãª¹éíÒÂÒ·íÒ¤ÇÒÁÊÐÍÒ´·ÕèäÁÁÕáÍÅ¡ÍÎÍÅËÃ×͵ÑÇ·íÒÅÐÅÒ¡Ѻ¼ÅÔµÀѳ±à·Ò¹Ñé¹ Do not use a high pressure washer to clean the products. ËÒÁãªà¤Ã×èͧ©Õ´¹éíÒáç´Ñ¹Ê٧㹡Ò÷íÒ¤ÇÒÁÊÐÍÒ´¼ÅÔµÀѳ ± 5/6 FR-DM-17 REV.03 EFF 15/09/17 For Remote driver To replace the LED module or the entrire luminaire.Please consult your sales representative. ËÒ¡µÍ§¡ÒÃà»ÅÕè¹ LED module ËÃ×Íâ¤Áä¿â»Ã´µÔ´µÍµÑÇá·¹¢Ò¢ͧ¤Ø³ LED LED For On-Off/1-10V dimming/ DALI LED To replace the LED module or the entrire luminaire.Please consult your sales representative. ËÒ¡µÍ§¡ÒÃà»ÅÕè¹ LED module ËÃ×Íâ¤Áä¿â»Ã´µÔ´µÍµÑÇá·¹¢Ò¢ͧ¤Ø³ LED LED 2 3 0V Environmental protection: Waste electrical products should not be disposed of with household waste. please recycle where facilities exist.check with your local authority or retailer for recycling advice According to directive 2002/96/CE and directive 2012/19/EU Waste Electrical and Electronic Equipment (WEEE). ËÒÁ·Ô駼ÅÔµÀѳ±¹ÕéÃÇÁ¡Ñº¢ÂÐ㹤ÃÑÇàÃ×͹ª¹Ô´Í×è¹æàÁ×èÍÊÔé¹ÊØ´ÍÒÂØ¡ÒÃ㪧ҹâ»Ã´á¡¼ÅÔµÀѳ ±ÍÍ¡ ¨Ò¡¢Í§àÊÕ»ÃÐàÀ·Í×è¹æáÅÐÃÕä«à¤ÔÅÍÂÒ§àËÁÒÐÊÁà¾×èÍʧàÊÃÔÁ¡ÒùíÒ·ÃѾÂҡáÅѺÁÒ㪫éíÒ«Ö觨ЪÇ »Í§¡Ñ¹ÍѹµÃÒµÍÊÔè§áÇ´ÅÍÁËÃ×ÍÊØ¢ÀÒ¾¢Í§Á¹ØÉ·Õèà¡Ô´¨Ò¡¡Ò÷Ô駢ÂÐâ´ÂäÁÁÕ¡ÒäǺ¤ØÁ ÍÒ§ÍÔ§µÒÁÃÐàºÕº 2002/96/CE áÅÐÃÐàºÕº 2012/19/EU Waste Electrical and Electronic Equipment (WEEE). Replacing the LED module ÇÔ¸Õ¡ÒÃà»ÅÕè¹ LED module 1. Contact your sales representative for replacement LED modules. Make sure that the replacement module match the initially supplied module. Note the part number printed on the LED module. àµÃÕÂÁ LED module ã˵ç¡ÑºÃع·ÕèµÍ§¡ÒÃà»ÅÕè¹â´ÂµÃǨÊͺ·ÕèËÁÒÂàÅ¢·Õè¾ÔÁ¾º¹LED modules áÅÐ µÔ´µÍµÑÇá·¹¢ÒÂà¾×èÍÊÑ觫×éÍ LED modules ·ÕèµÍ§¡ÒÃà»ÅÕè¹ 2. The LED module can be replaced by qualified persons using standard tools. ¡ÒÃà»ÅÕè¹ LED module µÍ§·íÒâ´ÂªÒ§¼ÙªíÒ¹Ò­áÅÐãªà¤Ã×èͧÁ×Í·Õèä´ÁÒµÃฐÒ¹ 3. Disconnect power before opening the luminaire housing. µÑ´áËŧ¨ÒÂ信͹·Õè¨Ðà»´µÑÇâ¤Á 4. Replace the old LED module with the new LED module. Reapply thermal interface material as supplied with the new LED module. ¶Í´ LED module ·ÕèªíÒÃØ´ÍÍ¡ ¨Ò¡¹Ñ¹·íÒ¤ÇÒÁÊÐÍÒ´¨Ø´ÇÒ§ËÅÍ´ áÅǨ֧ ·íÒ¡ÒûÃСͺ LED module ãËÁ áÅеͧà»ÅÕè¹ á¼¹Thermal Pad ËÃ×Í Thermal Grease ´Ç·ء¤ÃÑé§ 5. Inspect gaskets and if required replace with new gaskets. Defective luminaire covers must be replaced. Inspect correct wiring of replaced LED module. µÃǨÊͺ»ÃÐà¡ç¹áÅЪÔé¹Êǹ¢Í§µÑÇâ¤Á ¶ÒªíÒÃØ´àÊÕÂËÒÂãË·íÒ¡ÒÃà»ÅÕè¹ãËÁ áÅеÃǨÊͺ¡ÒÃà¢ÒÊÒÂ俢ͧ LED module ·Õèà»ÅÕè¹ãËÁ¶Ù¡µÍ§ËÃ×ÍäÁ 6. Close the luminaire housing before reconnecting power. »´½Ò¤ÃͺÅçͤâ¤Áä¿ãËàÃÕºÃÍÂ¡Í¹à»´ä¿ Last Revised On :27/09/2023 REV.06 6/6 FR-DM-17 REV.03 EFF 15/09/17 ">
Публичная ссылка обновлена
Публичная ссылка на ваш чат обновлена.
